Drive Train / Truck Maintenance

How to Tighten the Motor Arm
Tools and Materials: 3mm Allen T-Handle 2.5mm Allen T-Handle Skate T-Tool Motor Arm Glue  Thread Lock   Recommended Tools: Heat Gun (or Hair...
Tue, 31 Jul, 2018 at 10:49 PM
Replacing a Drive Belt
Parts: Drive Belt   Tools and Materials: 3mm Allen T-Handle Skate T-Tool Thread Lock   Process: On the side of the belt you want to remove...
Tue, 31 Jul, 2018 at 10:51 PM
Replacing a Pulley
Parts: Pulley Replacement Kit: Pulley 2 x Pulley Set Screws Drive Belt Thread Lock   Tools and Materials: 3mm Allen T-Handle Skate T-Tool...
Wed, 15 Aug, 2018 at 4:37 PM
How to Tighten Motor Screws
Tools and Materials: 3mm Allen T-Handle Skate T-Tool #2 Phillips Screwdriver 2mm Allen T-Handle (optional) Thread Lock (optional) Heat Gun or Hair Dr...
Wed, 1 Aug, 2018 at 4:32 PM
Replacing a Motor
Parts: Motor Replacement Kit Motor Pulley 2 x Pulley Set Screws 3 x Zip Ties 4 x Motor Screws Drive Belt Thread Lock  Tools and Materials:...
Wed, 15 Aug, 2018 at 4:43 PM
Installing a New Rear Truck with Motors (Pre-Installed)
Parts: Rear Truck with Motors Pre-Installed 2 x Belt 2 x Motor Wire Grommet Tools / Materials: 3 x Zip Ties 3mm Allen Wrench T-Tool #2 Phillips...
Wed, 15 Aug, 2018 at 4:43 PM
Installing a Rear Truck Replacement Kit
Parts: Rear Truck Replacement Kit Rear Truck 2 x Pulley 4 x Pulley Set Screws 2 x Zip Ties 8 x Motor Screws 2 x Drive Belt Thread Lock  Tool...
Thu, 2 Aug, 2018 at 9:57 AM
Removing and Replacing Components of a Drive Wheel
Process Use the Skate T-Tool to remove the axle nut and outer speed washer.     Pull off the Drive Wheel away from the drive train. If t...
Tue, 31 Jul, 2018 at 11:05 PM
How to Lift your Rear Hanger
If you are having difficulty tightening the rear truck nuts, you can lift up the entire hanger to make access easier. Use the Skate Tool to remove the k...
Tue, 31 Jul, 2018 at 9:39 PM