On rare occasions your remote's thumb throttle may engage the brakes when you expect it to coast, and may coast when you expect it to brake. When this happens we recommend you attempt to reset the center point.


1) Make sure the remote is off.


2) Press and hold the PAIRING button and the ON/OFF button on the remote together for 3-5 seconds until all 4 LEDs light up solid (not blinking). Remote neutral position is now calibrated.


3) Turn remote OFF.


4) Turn board ON and remote ON, and pair them the usual way.  The calibration resets the remote so it needs re-paired.


aremote

acalibration

acoast